Shelco

  • Thermally bonded microfibers for economical and efficient filtration
  • 100% Polypropylene construction provides for wide range of chemical compatibilities
  • Graded density pore structure provides true depth style filtration for higher dirt holding capacity
  • Fixed pore construction prevents unloading under higher differential pressure
  • No additives or surfactants that may cause foaming or other undesirable effects
  • Available in standard 2 1/2″ and 4 1/2″ (BB Style) diameter configurations
  • Stainless Steel or Carbon Steel construction
  • 150 PSI rated design
  • Band clamp or swing bolt lid closures
  • Stainless steel compression spring included
  • Adjustable Stainless Steel leg assembly
  • 2”FNPT,side inlet and bottom outlet
  • All housings come standard with Buna O-rings
  • 1⁄4”NPT gauge ports clean and dirty side
  • 1⁄4”NPT vent in head with1⁄2”NPT bottom drain
  • 1/8”Perf stainless steel basket
  • Ideal for high temperature applications up to 500°F (260°C) and high differential pressures up to 60 PSID
  • 304L and 316L Stainless Steel construction for compatibility with a wide range of uids
  • 2 through 840 microns ratings for broad range of uses from ne ltration to straining
  • Available in cylindrical and pleated con gurations for cost effective and extra service life requirements
  • Cleanable and reusable
  • All welded construction provides highest mechanical strength cartridges
  • End cap con gurations available in DOE, 222/Flat, 226/Flat, 1″ MNPT or 1″ FNPT ttings
  • Designed for industrial and commercial filtration needs
  • Heavy duty construction for durability
  • Offered in a wide variety of materials
  • Simple bolt-n-nut design for quick cartridge change outs
  • Inline fittings for easy installation
  • Knife edge seal at bothcartridge ends to eliminate by-pass
  • Housings accept double-open-end cartridges
  • Complete selection of pipe fittings: flanged, sanitary and BSP available
  • Precision winding patterns ensure accurate filtration ratings and high retention efficiencies
  • State-of-the-art computerised production machinery eliminates product variability
  • Various fibers and core materials for compatibility with a broad range of chemicals and high temperature applications
  • Suitable for filtration of liquids, compressed air and gases
  • Cost-effective and proven versus melt blown, spun-bond and resin-bonded cartridges
  • Available in standard 2 1/2″ and 4 1/2″ (BB Style) cartridge diameter configurations and other
  • Designed for industrial and commercial filtration needs
  • Heavy duty construction for durability
  • Offered in several materials
  • Simple ring closure for quick cartridge change outs
  • In line fittings for easy installation
  • Knife edge seal at both cartridge ends to eliminate by-pass
  • Housings accept double-open-end cartridges
  • Complete selection of pipe fittings : flanged, sanitary and BSP
  • Standard with mounting bracket kit
  • Designed for high ow industrial and commercial lter applications
  • 304L or 316L Stainless Steel Construction for maximum durability
  • 2BFS housings with Clamp Closure- Recognized market leader offering exceptional value – Clamp closure offers quick and easy bag change-outs – 150 PSI pressure rating up to 250°F- 3” Flanged Connections
  • 2BFS through 6BFS with Swing Bolt Closure- Heavy Duty Swing Bolt Closure and Davit Assembly are ideal for larger ow applications- Low pro le for easy bag change-outs- 150 PSI pressure rating up to 300°F- Eye nuts and davit handle are zinc plated to prevent gauling
  • Optional 134 epoxy coating for seawater or corrosive applications

Shelco’s sanitary series housings have been designed for the most critical and demanding applications requiring purity and durability.

Features

  • Designed for the most demanding high purity applications
  • Heavy-duty construction for durability
  • Standard 25 RA internals and 32 RA externals, other finishes available upon request
  • 1⁄2” TC vent and drains are standard
  • 222 or 226 configuration available on every model
  • Silicone O-rings standard, with other materials available
  • All wetted materials are 316L SS electro-polished

Shelco’s new MicroVantageTM pleated membrane cartridges are designed to meet the standards of a wide spectrum of industries.

Features

  • Each cartridge is rinsed to flush away any remaining manufacturing debris and wash away any extractables that may effect performance
  • Pharmaceutical grade elements are designed to be used as non-sterilizing grade cartridges
  • All materials of construction meet requirements of the FDA Title 21 of The Code of Federal Regulations
  • Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop
  • Polypropylene or Glass construction offers a wide range of compatibility
  • Compatible with Chemical Sanitation, Autoclave, and In-Line Sterilisation methods
  • Each cartridge is individually tested for integrity and efficiency at its rated pore size
  • Each assembly is validated to pass USP Class 6 Toxicology extractable tests for plastics
  • All P Grade cartridges are double layered to ensure integrity

Shelco’s new MicroVantageTM pleated membrane cartridges are designed to meet the standards of a wide spectrum of industries.

Applications

  • Bottled Water
  • DI Filtration
  • Processed Water
  • High Purity
  • Specialty Chemicals
  • Final Filtration
  • Waste Water
  • RO Filtration

Features

  • The MicroVantage Membrane Series is available in 0.1,0.2 and 0.45 pore sizes.
  • All materials of construction meet requirements of the FDA Title 21 of The Code of FederalRegulations.
  • Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop.
  • Polyethersulfone construction offers a wide range of compatibility.
  • The WGAS cartridge is a non-flushed product with 6 sq.ft. of media.
  • Advantages are excellent throughput and low ∆P characteristics.

Shelco’s new MicroVantageTM pleated membrane cartridges are designed to meet the standards of a wide spectrum of industries.

Applications

  • Acids
  • Bases
  • Alcohols
  • Solvents
  • Esters
  • Ketones
  • Specialty Chemicals
  • Photoresists
  • Compressed Air
  • Process Gases
  • Tank Ventilation

Features

  • Each cartridge is individually tested for integrity and is absolute at the rated pore size
  • Each cartridge is rinsed and flushed to remove any remaining manufacturing debris.
  • All materials of construction meet requirements of the FDA Title 21 of The Code of Federal Regulations
  • Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop.
  • Final assemblies have been validated to pass USP class 6 Toxicology extractable tests,oxidizable
    substances for plastics, endotoxin level and other quality tests
  • Manufactured with inherently hydrophobic PTFE membrane.
  • All beverage, electronic and pharmaceutical grades come with a certificate of quality assurance

Shelco’s new MicroVantageTM pleated membrane cartridges are designed to meet the high standards of the pharmaceutical industry.

Applications

  • WFI
  • Aseptic Processing
  • Serums
  • Drugs
  • Biologicals
  • Chemicals
  • Tank Ventilation

Features

  • The MicroVantageTM Pharmaceutical Grade Series is available in a wide range of pore sizes.
  • Each cartridge is 100% integrity tested
  • All pharmaceutical grade cartridges are validated using modified HIMA protocols at a challenge level of 107 organisms per cm2 of filter media.
  • All materials of construction meet requirements of the FDA Title 21 of The Code of Federal Regulations
  • Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop.
  • Polyethersulfone, Nylon, and Polypropylene construction offers a wide range of compatibility.
  • Each cartridge is validated to pass USP class 6 Toxicology extractable tests, oxidizable substance for plastics, endotoxin level and other quality test. Non-pyrogenic per USP guidelines and using the LAL procedures..

Shelco’s new MicroVantageTM pleated membrane cartridges are designed to meet the high standards of today’s industry.

Applications

  • DI Water/Final Filtration
  • Solvents
  • Rinse Stations
  • Ultrapure Chemicals
  • Acids & Bases
  • Etchants
  • Vent/Process Air

Features

  • The MicroVantageTM Electronic Grade Series is available in a wide range of pore sizes.
  • Each cartridge is pulse power flushed until the rinse effluent reaches 17+megohm-cm and less than 3ppb TOC.
  • All Electronic Grade cartridges are validated using modified HIMA protocols at a challenge level of 106 organisms per cm2
    of filter media.
  • Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop.
  • Polyethersulfone, Nylon, and Polypropylene construction offers a wide range of compatibility.
  • Each cartridge is individually tested for integrity and is absolute at the rated pore size.
  • Each cartridge is validated to pass USP class 6 Toxicology extractable tests for plastics.

Shelco’s new MicroVantageTM pleated membrane cartridges are designed to meet the high standards of the beverage industry.

Applications

  • Bottled Water
  • Wine
  • Beer
  • Soft Drinks
  • Juices
  • Biological Filtration
  • Tank Ventilation

Features

  • The MicroVantageTMBeverage Grade Series is available in a wide range of pore sizes.
  • Each cartridge is rinsed with 17+megohm water to flush away any remaining manufacturing debris and any extractable that may effect performance, taste, foaming or brightness.
  • All Beverage Grade cartridges are validated using modified HIMA protocols at a challenge level of 106 organisms per cm2 of filter media
  • All materials of construction meet requirements of the FDA Title 21 of The Code of Federal Regulations.
  • Cartridges are designed for maximum throughput and particle retention at the lowest pressure drop.
  • Polyethersulfone, Nylon, and Polypropylene construction offers a wide range of compatibility.
  • Each cartridge is individually tested for integrity and is absolute at the rated pore size.
  • Each cartridge is validated to pass USP class 6 Toxicology extractable tests for plastics.

Features

  • Designed for industrial and commercial filtration needs
  • Heavy duty construction for durability
  • Offered in a wide variety of materials
  • Simple bolt-n-nut design for quick cartridge change outs
  • Inline fittings for easy installation
  • Knife edge seal at both cartridge ends to eliminate by-pass
  • Housings accept double-open-end cartridges
  • Complete selection of pipe fittings: flanged,sanitary and BSP available